Desk Mounting; Wall Mounting - BellSouth GH9497 Owner's Manual

Desk Mounting

Desk Mounting
For normal position, as shown in Figure 1, place
the BASE UNIT on any desired but suitable
location.

Wall Mounting

You may choose to put the BASE UNIT of your cordless telephone on a wall.
1. With the back of the BASE UNIT facing up, connect the SHORT TELEPHONE LINE
CORD to the TELEPHONE LINE CONNECTION JACK.
2. Insert the free end of the SHORT TELEPHONE LINE CORD through the hole of the
MOUNTING BRACKET.
3. Insert the OUTER HOOKS of the MOUNTING BRACKET into the matching slots on
the back of the BASE UNIT as shown in FIGURE 2.
4. Push the MOUNTING BRACKET upward until the LOCKING HOOKS snaps into the
inner slots of the BASE UNIT.
1
4
4
3
3
OUTER HOOKS
LOCKING HOOKS
5. Plug the free end of the SHORT TELEPHONE LINE CORD into the MODULAR WALL
JACK.
6. Align the upper keyhole of the MOUNTING BRACKET with the upper stud of the wall
plate, so that the opening end of the MOUNTING BRACKET matches the lower stud,
then pull the BASE UNIT down until it is securely seated.
SHORT TELEPHONE
LINE CORD
MOUNTING
BRACKET
2
FIGURE 2
10
FIGURE 1
WALL PLATE STUD
MODULAR WALL JACK
WALL PLATE
FIGURE 3