Table of Contents
Advertisement
Caller ID System Operation
5. When the desired setting is displayed, press and hold the
save the setting. A long "beep" will sound to confirm the setting has been saved.
6. Continue with programming or press the
STANDBY mode.
NOTE: The standard and default flash time setting is 600 msec. This is the setting
you should use to access standard telephone services such as call waiting. This
setting is adjustable to allow for PBX and other special uses.
H. Changing the Pause Time
1. Press and hold the
2. Press the
button to go to the PAUSE TIME programming option.
8
3. Press the
EDIT/FLASH
4. Press the SCROLL UP
5. When the desired setting is displayed, press and hold the
save the setting. A long "beep" will sound to confirm the setting has been saved.
6. Continue with programming or press the
STANDBY mode.
I. Programming One-Touch Voice Mail Dialing
1. Press and hold the
2. Press the
button to go to the VOICE MAIL programming option.
9
3. Press the
EDIT/FLASH
4. Press the TELEPHONE KEYPAD
used to access your voice mail messages (up to 15 digits).
5. When the desired setting is displayed, press and hold the
save the setting. A long "beep" will sound to confirm the setting has been saved.
6. Continue with programming or press the
STANDBY mode.
NOTE:
When reviewing a stored VOICE MAIL number that contains more than 11 digits,
the last 11 digits will be displayed first. Press the SHIFT RIGHT
the preceeding numbers.
VOICE MAIL
/MENU button to enter the menu.
VOICE MAIL
button to change the setting. "4" will begin flashing.
or DOWN
button to select the desired time delay.
VOICE MAIL
/MENU button to enter the menu.
VOICE MAIL
button to enter the voice mail speed dial number.
to
1
0
VOICE MAIL
26
/RE/PA button to
SAVE
/MENU button to return to
/RE/PA button to
SAVE
/MENU button to return to
buttons to enter the phone number
/RE/PA button to
SAVE
/MENU button to return to
button to view
Advertisement
Table of Contents
