Desk Mounting - BellSouth FILTERED SOUND MH9910V4 Owner's Manual

Desk Mounting

Desk Mounting
One of the special features of your equipment is the unique design of the
MOUNTING BRACKET which can hold your phone at an angle of 45 when
desk mounting. There are two positions to choose from:
1. NORMAL POSITION (Mounting Bracket not required)
For Normal Position, as shown in Figure 1, place the BASE UNIT on
any desired but suitable location.
O
2. 45 POSITION (See Figure 2)
With the back of the BASE UNIT facing up, insert the bottom hooks of
the MOUNTING BRACKET into the matching slots of the BASE UNIT (as
specified in Figure 3). Then push the top hooks of the MOUNTING
BRACKET into place.
FIGURE 2
FIGURE 1
12
O
FIGURE 3