Desk Mounting; Wall Mounting - BellSouth GH9640 Owner's Manual

Desk Mounting

Desk Mounting
One of the special features of your telephone is the unique design if the MOUNTING BRACKET
which can hold your phone at an angle of 30º when desk mounting.
1. 30º Position (See Figure 1):
With the back of the BASE UNIT facing up, insert the hooks of the MOUNTING BRACKET
(following the arrow direction for the DESK MOUNT) into the matching slots of the BASE UNIT
(as shown in Figure 2). Then slide the MOUNTING BRASCKET into place as indicated by the
arrows.
FIGURE 1
IMPORTANT: Attach the MOUNTING BRACKET when using your phone on a desk.
IMPORTANT
Placing your BASE UNIT near appliances such as
television, refrigerators, radios, or microwave ovens
may cause interference.

Wall Mounting

Wall Mounting
You may choose to put the BASE UNIT of your cordless telephone on a wall.
1. With the back of the BASE UNIT facing up, connect the SHORT TELEPHONE LINE CORD to
2. Insert the free end of the SHORT TELEPHONE LINE CORD through the hole of the MOUNTING
3. Insert the hooks of the MOUNTING BRACKET (following the arrow direction for the WALL
4. Insert the tabs into the slot on one side of the base then press the tabs on the other side & snap
5. Align the upper keyhole on the MOUNTING BRACKET with the upper stud of the wall plate, so
FIGURE 2
the TELEPHONE LINE CONNECTION JACK.
BRACET.
MOUNT) into the matching slots of the BASE UNIT (as shown below). Then slide the
MOUNTING BRACKET into place as indicated by the arrows. Plug the free end of the SHORT
TELEPHONE LINE CORD into the MODULAR WALL JACK.
into the slot.
that the opening end of the MOUNTING BRACKET matches the lower stud, then pull the BASE
UNIT down until it is securely seated
FIGURE 1
FIGURE 2
Base Unit