Table of Contents
Advertisement
Getting Started
120V WALL
OUTLET
TELEPHONE
JACK
TELEPHONE LINE CORD
7. Install the HANDSET BATTERY PACK by plugging it into the BATTERY CONNECTOR
inside the BATTERY COMPARTMENT.
8. Place the BATTERY PACK inside the BATTERY COMPARTMENT.
9. S l i d e t h e H A N D S E T B AT T E R Y
COMPARTMENT COVER firmly into
place in its closed position.
10. IMPORTANT: Before initial use, charge
the HANDSET for 12 hours.
11. TONE/PULSE Select Switch:
A. If your home is equipped with a tone
dialing system, set the TONE/
PULSE Select Switch to the TONE
position.
B. If you have a rotary dialing system,
set the TONE/PULSE Select Switch
to the PULSE position.
C. If you are not sure which system you
have, set the TONE/PULSE Select
Switch to the TONE position. Press
the
button on the HANDSET
TALK
to get a dial tone, and press any
button on the TELEPHONE KEYPAD
except the zero. If the dial tone
continues, it means that you do not
have TONE dialing service. Press
the
button on the HANDSET
TALK
to hang up. Set the TONE/PULSE
Select Switch to the PULSE mode
and then try again.
AC ADAPTOR
TELEPHONE LINE
CONNECTION
JACK
POWER-IN
CONNECTION JACK
TONE/PULSE
SELECT SWITCH
8
BATTERY PACK
BATTERY
COMPARTMENT
COVER
Advertisement
Table of Contents
