Table of Contents
Advertisement
Desk Mounting
Desk Mounting
One of the special features of your equipment is the unique design of the MOUNTING
BRACKET which can hold your phone at an angle of 45 when desk mounting. There
are two positions to choose from:
1. NORMAL POSITION (Mounting Bracket not required)
For Normal Position, as shown in Figure 1, place the BASE UNIT on any
desired but suitable location.
O
2. 45 POSITION (See Figure 2)
With the back of the BASE UNIT facing up, insert the bottom hooks of the
MOUNTING BRACKET into the matching slots of the BASE UNIT (as specified
in Figure 3). Then push the top hooks of the MOUNTING BRACKET into place.
FIGURE 2
FIGURE 1
11
O
FIGURE 3
Advertisement
Table of Contents
