Table of Contents
Advertisement
PN_3034423_C
THIS EQUIPMENT IS TO BE INSTALLED TO
COMPLY WITH THE APPLICABLE FEDERAL,
STATE, OR LOCAL PLUMBING CODE HAVING
JURISDIDTION 430-01-0056
Bumper installation instructions
Step 1:
Make sure the aluminum
channel and end caps are installed.
Step 3:
Starting on one end: while
inserting the bumper, push it up against the
end cap to prevent the bumper from shrinking
after installation(when it gets cold).
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Bumper Installation
Step :
the bumper slide into the channel.
Step 4:
into the channel with one hand, pull the
bumper toward you with the other to open
the inside lips. Slowly apply pressure by
rolling the bumper into the track.
8
Use silicone lubricant to help
As you insert the bumper
ISLA FOOD COUNTERS
5
Advertisement
Table of Contents
