Saddle Stitcher Unit Of The Booklet Finisher-L1 - Canon imageRUNNER ADVANCE C9270 PRO Basic Operation Manual

Saddle Stitcher Unit of the Booklet Finisher-L1

Check the location of the staple jam, and follow the procedure described below, while referring to the directions that appear on
the touch panel display, to remove the jammed staple.
• Make sure to close all covers and paper drawers of the machine before clearing any staple jams.
• Before clearing a staple jam in the saddle stitcher unit, remove all paper that has been output to the booklet tray.
The Booklet Finisher-L1 is an optional product.
Open the front cover of the fi nisher.
1
Pull out the saddle stitcher unit.
2
*1 Stapler Unit of the Saddle Stitcher Unit
*2 Saddle Stitcher Unit
2
1
*1 *2
1 Grip the handle of the
saddle stitcher unit, and
pull out until it stops.
2 Pull the stapler unit of
the saddle stitcher unit
towards you, and then
push it up.
251