Booklet Finisher-K1 (Optional) - Canon imageRUNNER ADVANCE C9270 PRO Basic Operation Manual

Booklet Finisher-K1 (Optional)

If a paper jam occurs inside the Booklet Finisher-K1, a screen prompting you to remove the jammed paper appears on the
touch panel display. Follow the procedure described below, while referring to the directions that appear on the touch panel
display, to remove the jammed paper.
Take care when handling the optional equipment that is attached to the machine. When an optional unit's cover is opened to
replace a staple cartridge, discard the punch waste, discard the trim waste, discard the staple waste, or clear paper or staple jams,
prints may still be output if other optional units are operating normally, and are not involved in the paper or staple jam removal
procedure.
The Booklet Finisher-K1 is an optional product.
Inside the Front Cover
The following illustration indicates the location of the paper jam. Please refer to it to remove the jammed paper.
B4
*
*Front Cover
Open the front cover of the fi nisher.
1
208
B2
A1
B1
B3