Mechanical Specifications; Environmental Specifications - Omron GigE Vision STC-BBS1242POE-BC Product Specifications And User's Manual

5.3

Mechanical Specifications

Model Number
Dimensions
Optical Filter
Optical Center Accuracy
Material
Lens Mount
Interface Connectors
Camera Mounting
Weight
(*1) Excluding the connectors
(*2) PoE power models could not use external DC power through Power/IO connector.
Please check connector pin assignment for Power/IO connector of PoE power models.
5.4

Environmental Specifications

Model Number
Operational Minimum
Temperature / Maximum
Humidity
Storage Temperature / Humidity
Vibration
Shock
RoHS
(*1) When using this camera, please ensures the camera is installed in system with appropriate heat dissipation (at camera
using condition) to not exceed operational temperature (temperature of sensor on camera) in this specifications document.
Even evaluating this camera, please ensures camera with appropriate heat dissipation to not exceed operational
temperature (temperature of sensor on camera) in this specifications document.
If the temperature (temperature of sensor on camera) is exceeding it in this specifications document while evaluating this
camera, evaluating result of performance and/or characteristics of camera could be different from information on this
specifications document.
STC-BxS1242POE-BC / STC-BxS1242GE-BC
Product Specifications and User's Guide
STC-BBS1242POE-BC / STC-BBS1242GE-BC
38 (W) x 38 (H) x 40.2 (D) mm (*1)
No Optical Filter
Positional accuracy in Horizontal and Vertical directions: +/- 0.35 mm
Rotational accuracy of Horizontal and Vertical: +/- 1.5 deg.
Power/IO connector: SM06B-SRSS (JST) (*2)
Twelve M3 screw holes (Four on front, two on top, bottom and both side plates)
Eight M2 screw holes (Two on top, bottom and both side plates)
STC-BBS1242POE-BC / STC-BCS1242POE-BC
Environmental Temperature: 0 deg. C (No condensation)
Temperature (temperature sensor on camera)
shall not exceed +67 deg. C (*1),
Environmental Humidity: 20 to 85 %RH
(No condensation)
Environmental Temperature: -20 to +70 deg. C,
Environmental Humidity: 20 to 85 %RH (No condensation)
20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G, XYZ 3 directions, 30 min. each
Acceleration 38 G, half amplitude 6 ms, XYZ 3 directions, 3 times each
STC-BCS1242POE-BC / STC-BCS1242GE-BC
38 (W) x 38 (H) x 40.5 (D) mm (*1)
Aluminum Alloy
C mount
Ethernet connector: RJ45 connector
Approximately 48 g
STC-BBS1242GE-BC / STC-BCS1242GE-BC
Temperature (temperature sensor on camera)
shall not exceed +68 deg. C (*1),
Environmental Humidity: 20 to 85 %RH
RoHS Compliance
No.21S075-01
IR Cut Filter
(No condensation)
16/73