Table of Contents
Advertisement
3 Make Fax Settings
The display returns to the standby mode:
●
The machine may enter the standby mode (Auto Clear function) while you
are setting it up. Make the setting again from the main menu.
The display turned OFF:
●
The machine may enter the Sleep mode while you are performing setup.
Press
[Energy Saver] to turn the display back ON and continue the setup.
User Telephone Number and Unit
Name
1
Press
[Menu].
2
Press
or
to select <4. TX/RX
SETTINGS>, then press [OK].
3
Press
or
to select <3. FAX
SETTINGS>, then press [OK].
4
Press
or
to select <2. USER
SETTINGS>, then press [OK].
5
Press
or
to select <1. UNIT
TELEPHONE #>, then press [OK].
6
Use
– ,
[numeric keys] to enter your fax/
telephone number, then press [OK].
Ex.
U N I T
T E L E P H O N E
1 2 3 X X X X X X X
Maximum number of digits: 20 digits including spaces
If you accidentally enter an incorrect number, press
or
/
[Clear] to delete the last number.
About Sender Information
The sender information you register in the machine appears in the header of each page received by your
recipient.
6
#
7
Press
[Menu] twice.
8
Press
or
to select <2. TX/RX
COMMON SET.>, then press [OK].
9
Press
or
to select <1. TX SETTINGS>,
then press [OK].
10
Press
or
NAME>, then press [OK].
11
Use
– ,
[numeric keys] /
enter the unit name, then press [OK].
Ex.
U N I T
N A M E
C A N O N
−
Maximum number of characters: 24 characters
including spaces
−
Unit name: your name, company name, etc.
If you accidentally enter an incorrect character, press
or
to move the cursor to the character that needs
correction and press
[Clear] to delete the character.
12
Press
[Stop/Reset] to return to the
Standby mode.
to select <1. UNIT
[Tone] to
: A
Advertisement
Table of Contents
