Sending Faxes; Settings Required To Send Faxes; Registering The Fax Number, Unit Name, And Line Type - Canon imageRUNNER ADVANCE C2020 Setup Manual

5
Press (Start).
If the [Original Size] screen is displayed, specify the size of the
original → press [OK].
6
Press [Start Sending].
2
The scanned original is sent to the shared folder.

Sending Faxes

This example describes the procedure for sending
a fax.
The flow of operations is indicated below.

. Settings Required to Send Faxes

•

Registering the Fax Number, Unit Name, and Line Type

• Attaching the Sender's Name to Sent Documents

. Sending Faxes

• Storing New Destinations
• Sending a Fax
0
Settings Required to Send
Faxes
To send a fax, you must specify a fax number, unit name, and
other settings.
The following example describes the procedure for the
settings below:
Fax Number
*1
0XXXXXXX
Unit Name
*1
sales dept.
Line Type
*1
Tone
TX Terminal ID
Print
*1 To specify the telephone line settings, you must log in as an
administrator. To log in as an administrator, see "Logging In to the
Machine as an Administrator, " on p. 8.
Registering the Fax Number, Unit Name, and
Line Type
Register the fax number and unit name displayed/printed on
the destination machine. Set the line type to 'Tone' .

Press (Settings/Registration).

Press [Function Settings].