HP P Class 733/800/866MHz / 1GHz Administrator's Manual page 95

To install Windows for Remoteboot Workstations, refer to the relevant section of
the online installation help.
3 To start the Remoteboot service:
a In Control Panel, choose the Services icon.
b Select the Remoteboot service, and start it. You may configure it to start
automatically by selecting the startup button.
4 To install the Bootblock and configurations for the HP Ethernet Family Adapter:
a Open a DOS box in your NT AS.
b Insert the LAN Disk in the flexible disk drive. Make this drive the current drive.
c Change to the
\RPL\NTRPL
\RPL\NTRPL
d Type
HPIASRPL C:\WINNT35\RPL
drive and directory where the Remoteboot service is installed.
e You have now prepared your server, by copying all the files you need to run the
Remoteboot services from the LAN Disk.
5 Setting up the Remoteboot:
To install other protocols as IPX, or TCP/IP, or to manage your profiles and
workstations, please refer to the Windows NT online installation help.
Remote Boot on Windows NT 3.5x AS (RPL)
directory of your flexible disk drive by typing
assuming
5 Configuring for Remote Boot
cd
is the
C:\WINNT35\RPL
English 95