HP P Class 733/800/866MHz / 1GHz Administrator's Manual page 84

5 Configuring for Remote Boot
Setting Up a Novell NetWare 3.x and 4.x Server for Remote Start
2 Install the drivers on the bootable diskette as follows:
a Copy the following files onto the bootable diskette:
LSL.COM
PCNTNW.COM
IPXODI.COM
VLM.EXE
*.VLM
NET.CFG
Note:
•
The PCNTNW.COM and NET.CFG files are in the subdirectory
\NOVELL\DOSCLNT\
•
The LSL.COM and IPXODI.COM files are in the
Novell WSGEN diskette.
•
VLM.EXE and the *.VLM files are supplied on the Novell diskette.
b Create an AUTOEXEC.BAT file on the bootable diskette that will enable the
PC to log onto the network.
The AUTOEXEC.BAT file could, for example, include the following lines:
PROMPT $P$G
LSL
PCNTNW
IPXODI
VLM
F:
LOGIN server/user
84 English
on the LAN Disk.
the first network drive
use for a PC with disk drives,
F:
use for a diskless PC
A:
server is the name of the server
that the user will log onto; it isn't
necessarily the same server from
which the client PC is
remotely-booted.
user is the name that identifies the
user on that server.
directory on the
\DOSODI