HP P Class 733/800/866MHz / 1GHz Administrator's Manual page 19

CAUTION Before running HPIEDIAG:
•
•
To run HPIEDIAG:
1 Insert the diskette containing the HPIEDIAG utility in drive A.
2 Make drive A the current drive, type:
3 Change to the \DIAG directory, type:
4 Start the HPIEDIAG utility, type:
HPIEDIAG automatically detects the presence of the HP Ethernet Family Adapter,
and displays the settings of the interface: I/O address, IRQ, DMA channel, and MAC
address:
HP Ethernet Family Adapter Diagnostic
Example HPIEDIAG screen.
•
•
•
•
Make sure your network software and drivers are not running. This may require
editing configuration files and restarting the operating system.
Make sure the integrated LAN adapter is enabled in the SETUP program.
Ethernet Family Adapter Status
I/O Address Interrupt Level
FCE0h IRQ 10
Main Menu
Interface Test
Link Test
Exit Program
Use the or key to move the highlight to the menu item
or
Link Test Exit Program
Use the key to display help about the highlighted item.
Use to select the highlighted item.
Use the key to return to the previous menu.
A:
CD \DIAG
HPIEDIAG
DMA Channel MAC Address
N/A 080009xxxxxx
.
1 Setting Up the Network Connection
Running HPIEDIAG
Interface Test
English
,
19