HP P Class 733/800/866MHz / 1GHz Administrator's Manual page 116

Ethernet family adapter
Hide thumbs Also See for P Class 733/800/866MHz / 1GHz:
Table of Contents

Advertisement

Glossary
performs a specific function for the
layer above. Protocols allow products
from different vendors to communicate
on the same network. One of the most
popular LAN protocols is Ethernet.
Another common LAN protocol is
IBM's token-ring network.
protocol stack The collection of
software modules that implements a
particular network protocol (such as
TCP/IP).
PXE Preboot eXecution
Environment. A boot rom which uses
the DHCP and TFTP protocols. PXE
creates an environment in which
certain desktop management
functions can be performed prior to
the client operating system loading.
RAM Random Access Memory. Any
type of computer memory that can be
accessed randomly. RAM is the most
common type of memory found in
computers. RAM comes in two basic
types: SRAM (Static RAM) and DRAM
(Dynamic RAM). SRAM and DRAM
differ in the technologies used to
store their data. SRAM is faster, and
hence, more expensive than DRAM.
RAM is volatile in nature and will not
retain its contents when power is
turned off. In common usage, RAM is
often referred to as main memory
which is used to store programs and
data.
Redirector A software module that
is loaded into every network station. It
captures application program
requests for file and peripheral
services and routes them through the
network: that is, the redirector
transforms client-side requests into
network requests.
registry A database maintained by
Microsoft Windows 95 for storing
hardware and software configuration
information. The registry is used
heavily in Plug and Play systems.
repeater A repeater is used to
extend the physical topology of the
network, allowing two or more cable
segments to be coupled together. No
more than four repeaters are
permitted between any two stations.
ring topology A network topology
in which all devices are connected
together in the shape of a closed loop.
Ring networks are relatively
expensive and difficult to install.
However, they are robust (one failed
device will not cause the entire
network to fail). Most ring networks
use a token-passing protocol that
allows a device on the ring to send
messages out when it receives a
special bit pattern called a token.
English
116

Advertisement

Table of Contents
loading

Table of Contents