HP P Class 733/800/866MHz / 1GHz Administrator's Manual page 71

6 Before running any network application (such as FTP or TELNET), PC/TCP must
be started. Add the following lines near the beginning of the AUTOEXEC.BAT file:
SET PCTCP=C:\FTP\PCTCP.INI
C:\FTP\NETBIND
C:\FTP\ETHDRV
7 The changes made to the PROTOCOL.INI, CONFIG.SYS and AUTOEXEC.BAT
will not take effect until your computer is rebooted. Reboot your computer in
order to activate the FTP PC/TCP software.
The installation of FTP PC/TCP is now complete.
4 Installing Other Network Drivers
NDIS 2.01 Driver with FTP PC/TCP 2.x for DOS/Windows
English 71