HP P Class 733/800/866MHz / 1GHz Administrator's Manual page 93

PROTECT This parameter tells RPL.NLM to configure the bootstrap program
so that it will protect itself in the workstation's memory. It does this
by adjusting the Memory Size variable in the BIOS data area
(40:13) to reflect the amount of memory that it uses. Using this
parameter will reduce the amount of memory that the workstation
has available for DOS by about 12 KB.
It is recommended that the PROTECT parameter is not used unless
absolutely necessary.
PS=SERVER This parameter tells the bootstrap program to attach to a NetWare
file server other than the one where RPL.NLM is loaded. "SERVER"
is the name of a NetWare file server that contains the Image file for
the workstation.
5 Configuring for Remote Boot
Setting Up a Novell NetWare 3.x and 4.x Server for Remote Start
English 93