Legal Notices The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
RDRAM 10krpm memory a. Unless otherwise mentioned, the operating system for the HP x2000 Workstation is Windows 2000. Windows NT is also provided on the HP Recovery CD-ROM. x2000 Supported Accessories Memory Upgrades 2 x 64 MB kit, PC800 ECC RDRAM main memory...
Page 7
Matrox Millennium G450 dual 16MB graphics card A7192A nVidia Quadro2-MXR graphics card A6064A nVidia Quadro2-PRO graphics card A6065A ATI FireGL2 3D graphics card A6076A ATI FireGL4 3D graphics card A7226A Security HP Kensington™ lock security cable F1645A HP Spare master pass key D6658B Chapter 1...
HP x2000 Service Information System Board Connectors, BIOS, and Memory System Board Connectors, BIOS, and Memory Main chassis fan Auxiliary power (MT models only) i850 MCH Processor fan Pentium 4 processor (socket 423) CD-ROM ATX12V power audio in Chassis intrusion...
ON clears the passwords at next boot. ON = Minitower chassis BIOS History For the latest BIOS, the flasher utility program, and the BIOS history refer to the HP World Wide Web site. The BIOS is in the form IY.W1.yy.zz where: yy= BIOS version number...
HP x2000 Service Information System Board Connectors, BIOS, and Memory If only two RDRAM modules are installed, use the sockets marked A1 and B1. The other two sockets (A2 and B2) must contain continuity modules. Replacing the Processor Removing the Existing Processor 1.
Page 11
HP x2000 Service Information System Board Connectors, BIOS, and Memory 6. Open the Zero Insertion Force (ZIF) lever, located at the side of the processor socket, until it is in the vertical position (depending on the socket design, the handle may need to go past vertical), then carefully lift out the processor.
Page 12
HP x2000 Service Information System Board Connectors, BIOS, and Memory retaining clip first. Figure 1-4 Attaching the Heatsink 5. Connect the heatsink power connector to the system board. 6. Replace the Workstation’s cover. Reconnect all the power and telecommunications cables.
HP x2000 Service Information Mass Storage Device Guide Rails Mass Storage Device Guide Rails Extra guide rails are attached to the side of the front access cage for additional mass storage device installations. Depending on the device to be installed, dedicated guide rails are required and are easily recognized by their distinct size and color.
HP x2000 Service Information Parts and Part Numbers Parts and Part Numbers Chapter 1...
Page 15
HP x2000 Service Information Parts and Part Numbers Table 1-1 Parts List Item Description Replacement Exchange Part Number Part Number Chassis assembly: A7218-62001 — Main fan assembly 120mm A1280-68509 — LCD MaxiLife status panel 5064-9162 — 5.25-inch to 3.5-inch HDD adapter tray 5002-6267 —...
Page 16
HP x2000 Service Information Parts and Part Numbers Table 1-1 Parts List Item Description Replacement Exchange Part Number Part Number Standard hard disk drives 20 GB IDE Ultra ATA/100 7.2k rpm P1640-63001 P1640-69001 40 GB IDE Ultra ATA/100 7.2k rpm...
Page 17
HP x2000 Service Information Parts and Part Numbers Table 1-2 System Board Description Replacement Exchange Part Part No. System board: x2000 system board A7218-66510 A7218-69510 Processors (Socket): Intel Pentium 4, 1.4 GHz P2136-63001 P2136-69001 Intel Pentium 4, 1.5 GHz P2137-63001...
Page 18
HP x2000 Service Information Parts and Part Numbers Table 1-4 Recovery CDs Recovery CDs — English US (ABA kit) A7218-95001 German (ABD kit) A7218-95002 French (ABF kit) A7218-95003 Japanese (ABJ kit) A7218-95004 English UK (ABU kit) A7218-95005 English Europe (ABB kit)