Snmp Setup - Planet Networking & Communication Modbus Gateway Series User Manual

4.6 SNMP Setup

Use the Port Menu to display or configure the Modbus Gateway's ports. This section includes the page that displays current port
configurations. Ports can also be configured here. The Port Configuration screen in
The page includes the following fields:
Object
•
SNMP Active
• Community
• Contact
• Location
• Trap Server
Events
Object
•
Cold Start Trap
• Warm Start Trap
• Authentication Failure
Trap
User's Manual of MG-11x Modbus Gateway Series
Figure 4-6-1: SNMP Setup page Screenshot
Description
Indicates the SNMP mode operation. Possible modes are:

Disable:
Disable SNMP mode operation.

Enable:
Enable SNMP mode operation.
Indicates the security name to map the community to the SNMP Groups
configuration.
The textual identification of the contact person for this managed node, together
with information on how to contact this person.
The physical location of this node (e.g., telephone closet, 3rd floor).
Indicates the SNMP trap destination address. It allows a valid IP address or
domain name.
Description
This event is triggered when the power is interrupted and restarted.
This event occurs when the device is reset but does not turn off the power.
This event occurs when an incorrect or unauthorized password are entered.
56
Figure 4-6-1 appears.