Mapping - Planet Networking & Communication Modbus Gateway Series User Manual

• Data Bits

4.5.4.2 Mapping

The ID Mapping Setup is a routing mechanism for gateway. It can follow routing rule on this table to transfer Modbus request to
the specific serial port or TCP server that connects the Modbus slave device. The screen in
In block 1, it's a setting value for slave ID 1~3 that will forward to serial port 1. When you get a Modbus requests with slave ID
1~3, it will follow this rule to be routed to the targeted Modbus slave device. In block 2, you can select the one to add, edit or
delete the rule on the table. The block 1 and block 2 screen in
of transmission. The default is 1.
Indicates the number of the bits in a transmitted data package. The allowed value is
5,6,7,8 and default value is 8.
Figure 4-5-16: Mapping Status Page Screenshot
Figure 4-5-17
Figure 4-5-17: The Block 1 / Block 2 Screenshot
52
User's Manual of MG-11x Modbus Gateway Series
appears.
Figure 4-5-16 appears.