Accessible Ip - Planet Networking & Communication Modbus Gateway Series User Manual

4.3 Accessible IP

This page provides the specified IP address to connect with Modbus Gateway. When the list of accessible IP is enabled, only IP
address in the list can connect to device. When the function is disabled, there is no such restriction. The list allows user to
configure up to four IP groups. The accessible IP setup screen in
The page includes the following fields:
Object
• Active
• Activate NO
• Start IP Address
• End IP Address N
Example
Allowed hosts
• Any host
• 192.168.0.120
• 192.168.0.1 to
192.168.0.254
User's Manual of MG-11x Modbus Gateway Series
Figure 4-3-1: Accessible IP Setup Page Screenshot
Description
Configure the accessible IP list. Possible modes are:
Disabled: Disable accessible IP lists.
Enabled: Enable accessible IP lists.
Enable or disable activated IP groups.
Enter the IP address for starting.
Enter the IP address for ending
Start: IP Address setting
disable
192.168.0.120
192.168.0.1
44
Figure 4-3-1 appears.
End: IP Address N
disable
192.168.0.254