Com Port Mapping - Planet Networking & Communication Modbus Gateway Series User Manual

5.3 COM Port Mapping

This function should be set as VCOM mode on the Modbus Gateway. VCOM software will create the corresponding virtual
COM ports for com port mapping as shown in
Add Virtual COM port
1. Click "Search" to search the network for device servers.
2. Once a server has been found, select it to add it to the COM mapping list and Click "OK" to take effect as shown in
5-3-2.
3. Virtual com ports are generated as shown in
User's Manual of MG-11x Modbus Gateway Series
Figure 5-3-1.
Figure 5-3-1 : VCOM software
Figure 5-3-2 : VCOM software
Figure 5-3-3.
64
Figure