Table of Contents
Advertisement
4.7.3 Firmware Update
This page facilitates an update of the firmware controlling the switch. The Firmware Update screen in
To open Firmware Update screen, perform the following:
1.
Click Maintenance -> Firmware Update.
2.
The Firmware Update screen is displayed as in
3.
Click the "
4.
Select on the firmware and then click "
5.
Once the software is loaded to the system successfully, the following screen
new software after rebooting.
Figure 4-7-4: Firmware Update Page Screenshot
Figure
"button of the Main page; the file selection menu pops up for you to choose firmware.
"; the Software Upload Progress would show the file with upload status.
Figure 4-7-5: Rebooting Screenshot
User's Manual of MG-11x Modbus Gateway Series
4-7-4.
Figure 4-7-5
58
Figure 4-7-4
appears.
appears. The system will load the
Advertisement
Table of Contents
