Access Nvr With Its Default Ip Address - Planet Networking & Communication NVR-810 User Manual

3.2 Access NVR with its default IP
The NVR comes with a pre-configur
However, it is only used when there
network. Connect the NVR
directly to the NVR using a cr
The PC that is connected directly to the NVR (or within the same local area
network) should receive an IP from
browser with NVR default IP addres
You should be prompted for the user
username "admin" and password "admin" and then click" OK" to enter t
system.
address
ed static IP address "192.168.0
is no DHCP server presented in the
and PC to yo r switch or hub, or connect th u
ossover C AT5 Ethernet cable.
it. Simply access the NVR from your web
s.
name and password. Enter its default
.20".
e PC
he