Editing Equipment Configuration - Trane Symbio 700 User Manual

Symbio Service and Installation Mobile Application

Editing Equipment Configuration

Depending on how the split system condenser and air handler are paired, adjusting the equipment configuration may be required for proper operation. To edit the
equipment configuration:
1. On the home screen, select the tools icon at the
bottom of the screen to navigate to the Settings
screen.
Figure 11. Home screen
4. The equipment must be stopped to edit the
configuration. Press Proceed to stop the
equipment.
Figure 14. Stopping the equipment screen
12
2. Select View Configuration.
Figure 12. View configuration screen
5. On the Edit screen, scroll to the option that
needs to be edited. To edit an option, select the
green text.
Figure 15. Edit configuration screen
3. Select Edit.
Figure 13. Edit configuration screen
6. Select the desired option. Then select the back
arrow at the top of the page to go back to the
previous page.
Figure 16. Edit configuration screen
BAS-SVU054B-EN