Replace The Cover - HP Kayak XA User Manual

ashak.bk : ashak-3.fb4 Page 35 Wednesday, July 15, 1998 6:41 PM
LCD Error
Messages
CPU error Reset the PC Workstation or power-off
the LAN.
No RAM, RAM Check that the memory modules are
type correctly installed.
- Check that accessory boards are firmly
seated in their slots.
- Verify that any switches and jumpers
on the accessory boards are properly
set.
- Check that the switches on the system
board are properly set.
Temp disk, Temp Check fans and that air flow guide is
CPU, Temp IO not blocked.
slot
Fan CPU, Fan Check that fans are installed correctly.
disk, Fan IO slot
Power/Power Check that power supply is properly
supply connected.
No video Check that the video card is properly
installed.

4 Replace the cover.

5 Reconnect all cables and power cords.
6 Turn on the display and computer.
3 Troubleshooting Your HP PC Workstation
If Your PC Workstation Does Not Start Properly
Action
Refer to "The MaxiLife Control Panel"
on page 9.
Refer to "Installing Memory" in the
Upgrade and Configuration Guide.
Refer to "Installing Accessory Boards"
in the Upgrade and Configuration
Guide.
Refer to the manuals that came with
each board.
Refer to "Replacing the Power Supply
after Installing Accessories" on page 24
Refer to the manual that came with
the video card.
Reference
-
-
-
English 35