Connecting The Power Cords - HP Kayak XA User Manual

ashak.bk : ashak-1.fb4 Page 7 Wednesday, July 15, 1998 6:41 PM
Monitor Power Connector
NOTE

Connecting the Power Cords

1 Remove any warning labels that may be covering the computer's
power connector on the rear of the computer.
2 Connect the power cords to the display and the computer. (The
connectors are shaped to go in one way only.)
On some PC Workstation models, the voltage is selected automatically.
If your PC Workstation has a voltage selection switch, make sure it is set
correctly.
3 Connect the display's power cord and the computer's power cord to
grounded outlets.
1 Setting Up and Using Your PC Workstation
Connecting the Power Cords
PC Workstation
Power Connector
Grounded Outlet
English 7