ashak.bk : ashak-1.fb4 Page 13 Wednesday, July 15, 1998 6:41 PM
Setting Hardware Passwords
You can set two passwords, the Administrator (or Supervisor)
password and the User password, to provide two levels of protection
for your PC Workstation. You set both passwords using the
menu in the Setup program (refer to "The HP Summary Screen and
Setup Program" on page 38).
Setting a Password
To set a Hardware Administrator or User password:
1 Start the Setup program (refer to "The HP Summary Screen and
Setup Program" on page 38).
2 Select the
menu.
Security
3 Select the
Administrator
4 Choose the
Set Administrator
asked to enter your password twice. Save your changes when you
exit the Setup program by selecting
To remove the password, follow the same procedure as to set a
password. You will be asked to enter the existing password first. Then,
for the new password, leave the password field blank and press
. To confirm your choice, press
1 Setting Up and Using Your PC Workstation
or
password submenu.
User
or
Setup item. You will be
User password
, then
Exit
Setting Hardware Passwords
Security
.
Exit Saving Changes
a second time.
English
13