Important Safety Information - HP Kayak XA User Manual

ashak.bk : title.fb4 Page iv Wednesday, July 15, 1998 6:41 PM
WARNING
Who This Manual Is For
This manual is for anyone who wants to:
Set up the PC Workstation for the first time.
•
Configure the PC Workstation.
•
Add accessories to the PC Workstation.
•
Troubleshoot problems on the PC Workstation.
•
Find out where to get more information and support.
•

Important Safety Information

If you have any doubt that you can lift the PC Workstation or display
safely, do not try to move it without help.
For your safety, always connect the equipment to a grounded wall
outlet. Always use a power cord with a properly grounded plug, such as
the one provided with this equipment, or one in compliance with your
national regulations. This PC Workstation is disconnected from the
power by removing the power cord from the power outlet. This means
the PC Workstation must be located close to a power outlet that is easily
accessible.
For your safety, never remove the PC Workstation's cover without first
removing the power cord from the power outlet, and any connection to
a telecommunications network. Always replace the cover on the
PC Workstation before switching it on again.
To avoid electric shock, do not open the power supply. There are no
user-serviceable parts inside.
To avoid electric shock and harm from to your eyes by laser light, do not
open the laser module. The laser module should be serviced by service
personnel only. Do not attempt to make any adjustment to the laser
unit. refer to the label on the CD-ROM for power requirements and
wavelength. This product is a class 1 laser product.
iv English