Replace The Cover - HP Kayak XA-s 02xx Troubleshooting Manual

Check Internal Items
HP Kayak XA-s 02xx PC Workstation - Troubleshooting Your HP Desktop PC Workstation
If the PC Workstation still does not start properly, follow this procedure
to check the internal items:
1 Turn off the display, the computer, and all external devices.
2 Unplug all power cords and cables, noting their positions. Disconnect
the PC Workstation from any telecommunications network.
3 Remove the cover and check the following items:
LCD Error
Messages
-
Power CPU 1
Power CPU 2
CPU error
No RAM, RAM type
-
-
-
Temp disk, Temp CPU
Temp IO slot
Fan CPU, Fan disk
Fan IO slot
Power supply
Power
No video

4 Replace the cover.

5 Reconnect all cables and power cords.
6 Turn on the display and computer.
If Your PC Workstation Does Not Start Properly
a) Check all internal cables.
b) Ensure they are correctly attached and firmly in place.
Check that the processor and VRM are correctly installed.
Reset the PC Workstation or power-off the LAN.
Check that the memory modules are correctly installed.
Check that accessory boards are firmly seated in their slots.
a) Verify that any switches and jumpers on the accessory boards are
properly set.
b) Refer to the manuals that came with each board.
Check that the switches on the system board are properly set.
Check fans and that air flow guide is not blocked.
Check that fans are installed correctly.
Check that power supply is properly connected.
Check that power supply is properly connected, or that terminators and
VRMs are properly installed.
Check that the video card is properly installed.
Action
English
9