Change The Use Of Separator Sheets - Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual
Color digital multifunction imaging system
Hide thumbs
Also See for imageRUNNER ADVANCE C9075S PRO:
- Customer expectation document (56 pages) ,
- Safety instructions (48 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
Change the use of separator sheets
Change the use of separator sheets
Introduction
Separator sheets are empty sheets that are automatically inserted before each new set or
job to separate two sets or jobs. In the Settings Editor you can define the media that must
be used as separator sheets. The use of separator sheets can be enabled via the automated
workflows in the Settings Editor. However, you can change this setting trough the oper-
ator panel.
How to change the use of separator sheets
Touch 'Jobs' -> 'Waiting jobs'.
1.
Touch the job of which you want to change the settings.
2.
#
NOTE
You can only change the settings of the active print job
printer (press the 'Stop' button two times).
Press 'Properties'.
3.
Touch the 'Separator sheets' button to toggle between 'On' and 'Off'.
4.
Press 'OK'.
5.
•
Introduction to automated workflows, on page 331
154
Chapter 6 - Print jobs
after you stopped the
Advertisement
Table of Contents
