Reprint A Job - Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual

Reprint a job

Reprint a job
Introduction
#
NOTE
The following description is only applicable when the setting 'Printed jobs' in the
Settings Editor is enabled.
Print jobs that have been completed are moved from the list of 'Scheduled jobs' list to
the list of 'Printed jobs'. The 'Printed jobs' list helps you to reprint jobs quicker and eas-
ier.
What you need to know about the list of Printed jobs
• When you want to reprint a job, the selected job is always copied to the list of 'Waiting
jobs' first.
• You cannot change the job settings in the list of 'Printed jobs'. This is only possible
in the list of 'Waiting jobs'.
• You cannot reprint streaming jobs.
• The list of 'Printed jobs' does not store proof prints, system jobs and jobs that were
stopped or deleted.
• When you shut down the printer all jobs remain present in the list of 'Printed jobs'.
•
The list of 'Printed jobs' can only store jobs. To prevent the disk of your system from
becoming full, jobs must be deleted manually or automatically on a regular basis. In
the Settings Editor, you can indicate the cleaning period, then the clean-up is carried
out at midnight or at the next start-up (in general the next morning).
• If E-shredding is enabled, the jobs will be shredded after removal from the list of
'Printed jobs'.
How to reprint a job
Touch 'Jobs' -> 'Printed jobs'.
1.
Touch the job(s) you want to reprint or use the 'Select' button to make a selection.
2.
To undo the multiple selection and only select 1 job, you must touch that job for 2 sec-
onds.
Press 'Copy'.
3.
Touch 'Queues' -> 'Waiting jobs'.
4.
Touch the job you want to reprint.
5.
Touch 'Properties' if you want to change the settings, for example the number of sets.
6.
Press 'Print'.
7.
122 Chapter 6 - Print jobs