Load The Media Into The Inserter - Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual

Load the media into the inserter

Load the media into the inserter
Introduction
This section describes how to load media into the inserter (Document Insertion Unit-
H1).
Document Insertion Unit Staple Settings and Output Results Table
The following table shows the effect of the cover position, original position and the staple
settings on the output.
#
How to place the cover sheet/original
Document In-
sertion Unit*
272 Chapter 9 - Paper, toner, and staples
Feeder
1
Staple set-
tings
Glass plate
'Top left'
'1 staple'
/
'Left edge'
'2 staples'
'Top left'
'1 staple'
'Top edge'
'2 staples'
'Top left'
'1 staple'
'Top edge'
'2 staples'
Output re-
sults
A4, B5/LTR
A3, B4 / 11" X
17", LGL
A4, B5/LTR