Clean the automatic document feeder rollers
Clean the automatic document feeder rollers
Introduction
If your originals have black streaks or appear dirty after scanning them through the feeder,
clean the rollers of the feeder.
#
NOTE
•
It takes approximately 20 seconds to clean the feeder.
•
Use clean A4/LTR paper (60 to 80 g/m2 / 16 lb bond to 20 lb bond).
•
Feeder roller cleaning cannot be performed during printing.
Clean the ADF automatically
Touch 'System' -> 'Maintenance'.
1.
Press 'Start maintenance'.
2.
Touch 'Clean the rollers of the ADF' and touch 'Start' .
3.
A wizard opens.
Put 10 sheets of blank paper into the feeder.
4.
Touch 'Next'
5.
A status message displays.
Press 'Finish'.
6.
Touch 'Stop' to close the 'Maintenance tasks' menu.
7.
354
Chapter 11 - Maintenance and calibration