Stacker/stapler and integrated punch unit
Stacker/stapler components and their functions
No.
1
2
3
4
5
6
34
Chapter 2 - Main parts
Function
Buffer Pass Unit-F1 (standard)
Buffer Pass Unit-F1 is required to attach Staple Finisher-A1 or Booklet
Finisher-A1 to the main unit. Open Buffer Pass Unit-F1 to remove jammed
paper.
Front Cover of Staple Finisher-A1/Booklet Finisher-A1
Open this cover to replace the staple cartridge, remove jammed paper, or
clear a staple jam from the stapler unit and saddle stitcher unit.
Booklet tray (Booklet Finisher-A1)
Saddle stitched or saddle folded prints are output to this tray.
Lower tray
Prints are output to this tray.
Middle tray
Prints are output to this tray.
Upper tray
Prints are output to this tray.
#