Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual page 250
Color digital multifunction imaging system
Hide thumbs
Also See for imageRUNNER ADVANCE C9075S PRO:
- Customer expectation document (56 pages) ,
- Safety instructions (48 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
Load the media into the paper module
#
IMPORTANT
•
Paper which has been rolled or curled must be straightened out before loading it
into the paper tray.
•
Make sure that the height of the paper stack does not exceed the loading limit
mark ( ) on the inside of the paper tray.
#
NOTE
•
If there are instructions on the package of paper about which side of the paper to
load, follow those instructions.
•
When paper is loaded, the side facing up is the one printed on.
•
If problems occur, such as poor print quality or paper jams, try turning the paper
stack over, and reload it. However, textured paper, 1-sided coated paper, and paper
already printed on cannot be turned over. Change to new paper.
•
When loading paper, make sure that the height of the paper stack does not exceed
20 mm (13/16"). If the height of the paper stack exceeds 20 mm (13/16"), the
edges of the paper stack may become curled or creased, and poor print quality
may result.
Gently push the paper tray back into the machine until it clicks into place in the closed
5.
position.
The inside lifter automatically rises, and prepares the paper tray for printing.
#
When returning the paper tray to its original position, be careful not to get your
fingers caught, as this may result in personal injury.
250
Chapter 9 - Paper, toner, and staples
CAUTION
Advertisement
Table of Contents
