Reception Restriction; Remote Reception - Canon FAXPHONE L120 Advanced Manual

Advanced Fax
1
Features
Status Monitor
2
Reports and Lists
3
Troubleshooting
4
Appendix
5
Table of Contents
Index
■

Reception Restriction

You can restrict incoming fax calls from only the numbers
registered in the machine for speed dialing. This can help
eliminate unsolicited calls.
NOTE
– The sender's fax number must be registered in their machine and
must match the number registered in your machine for speed dialing.
– If you entered a pause or a space in the last four digits of a fax
number registered for speed dialing, you cannot receive calls from
that number.
1.
Press [Menu].
2.
Use [Up/Down] to select <RX SETTING?>, then
press [Set].
3.
Use [Up/Down] to select <7 RX
RESTRICTION?>, then press [Set].
4.
Use [Left/Right] to select <ON>, then press
[Set].
5.
Press [Stop/Reset] to return to standby mode.
■

Remote Reception

Remote reception allows you to use an external telephone
connected to the machine to receive faxes manually. This can
be useful when the machine is not nearby or being used by
someone else at the moment.
Back Previous
Registering Remote Reception ID
Follow this procedure if you want to change the default remote
reception ID of 25.
1.
Press [Menu].
2.
Use [Up/Down] to select <RX SETTING?>, then
press [Set].
3.
Use [Up/Down] to select <8 REMOTE RX?>,
then press [Set].
4.
Use [Left/Right] to select <ON>, then press
[Set].
5.
Use the numeric buttons to enter a two-digit
remote reception ID (00 to 99), then press
[Set].
6.
Press [Stop/Reset] to return to standby mode.
TOP
Next
1-9