Canon FAXPHONE L120 Advanced Manual page 52

Advanced Fax
1
Features
M
Status Monitor
2
Reports and Lists
3
Troubleshooting
4
Appendix
5
N
Table of Contents
Index
Manual receiving
A method of receiving faxes in which you answer all incoming
calls using the handset. If you hear a slow beep it indicates an
incoming fax transmission from another machine. Just press
[Start] to receive the incoming fax.
Manual redialing
When you use regular dialing, you can redial a number manually
simply by pressing [Redial] on the operation panel. The last
number called is the number redialed.
Memory sending
Scans a document into memory before the machine dials the
number(s) and sends it. This method allows you to retrieve your
original document immediately after scanning.
Modem
A device that converts (MOdulates) digital data for transmission
over telephone lines. At the receiving end, this device converts
the modulated data (DEModulates) to digital format that the
computer understands.
Noise
A term applied to a variety of problems that impair the operation
of telephone lines used for faxing.
Numeric buttons
The round, numbered buttons on the operation panel marked the
same as a standard telephone keypad.
Press them to perform regular dialing. You also use the numeric
buttons to enter numbers and letters when you register and
names, and for entering coded speed dialing codes.
Back Previous
O
One-Touch Speed Dialing
An automatic dialing method that allows you to dial a fax or
telephone number by pressing a single one-touch speed dial
button.
One-Touch Speed Dial buttons
The numbered buttons on the operation panel that may be
registered as single or a group of fax numbers. Once a number or
group is registered, you press one button to dial the entire
number or group.
TOP
Next
5-5