Guest Mode; Enabling Guest Mode; Disabling Guest Mode; System Settings - Garmin EDGE EXPLORE 2 Owner's Manual

Guest Mode

The guest mode feature allows you to limit the features and settings available before sharing the device with a
guest user.

Enabling Guest Mode

1 Select > Guest Mode > Enable.
2 Select an option:
• To enable guest mode and require a code to disable it, select
• To enable guest mode without requiring a code, select
The device limits the settings available for customization.

Disabling Guest Mode

1 Select > Guest Mode > Enable.
2 If necessary, enter the 4-digit code, and select
NOTE: After three incorrect attempts, you are prompted to enter the universal unlock code: Garmin.
3 Select an option:
• Select to restore the device settings used before guest mode was enabled.
• Select to keep the device settings used while guest was enabled.

System Settings

Select > System.

• Display Settings

(Display Settings, page
• Widget Settings (Customizing the Widget Loop, page
• Data Recording Settings
• Unit Settings (Changing the Units of Measure, page
• Tone Settings (Turning the Device Tones On and Off, page
• Language Settings (Changing the Device Language, page
Display Settings
Select > System > Display.
Brightness: Sets the backlight brightness.
Backlight Timeout: Sets the length of time before the backlight turns off.
Color Mode: Sets the device to display day or night colors. You can select the Auto option to allow the device to
set day or night colors automatically based on the time of day.
Screen Capture: Allows you to save the image on the device screen when you press

Using the Backlight

You can tap the touchscreen to turn on the backlight.
NOTE: You can adjust the backlight timeout
1 From the home screen or a data screen, swipe down from the top of the screen.
2 Select , and use the slider bar to manually adjust the brightness.
Customizing Your Device
41)
(Data Recording Settings, page
(Display Settings, page
, enter a 4-digit code, and select
.
.
42)
42)
42)
42)
42)
41).
.
.
41