Creating And Riding A Round-Trip Course; Creating A Course From A Recent Ride - Garmin EDGE EXPLORE 2 Owner's Manual

Creating and Riding a Round-Trip Course

The device can create a round-trip course based on a specified distance, starting location, and direction of
navigation.
1 Select Courses > > Round-Trip Course.
2 Select Distance, and enter the total distance for the course.
3 Select Start Location.
4 Select an option:
• To select your current location, select Current Location.
• To select a location on the map, select Use Map, and select a location.
• To select a saved location, select Saved Locations, and select a location.
• To select a location for which you recently searched, select Recent Finds, and select a location.
• To browse for and select a point of interest, select Points of Interest, and select a nearby point of interest.
• To select an address, select Search Tools > Addresses, and enter the address.
• To select an intersection, select Search Tools > Intersections, and enter the street names.
• To use coordinates, select Search Tools > Coordinates, and enter the coordinates.
5 Select Start Direction, and select a direction heading.
6 Select Search.
TIP: You can select
7 Select a course to view it on the map.
TIP: You can select
8 Select Save > Ride.

Creating a Course from a Recent Ride

You can create a new course from a ride you saved on this Edge device.
1 Select History > Rides.
2 Select a ride.
3 Select > Save Ride as Course.
4 Enter a name for the course, and select
12
to search again.
and to view the other courses.
.
Navigation