Board Specifications - AMD XILINX VPK120 User Manual

PS LPD MIO [21:22]: optional fan interface
○
LPD MIO[23]: VADJ_FMC power rail
○
• Security: PSBATT button battery backup
• SYSMON header
• Operational switches (power on/off, PROG_B, boot mode DIP switch)
• Operational status LEDs (INIT, DONE, PS STATUS, PGOOD)
See Power and Status LEDs
○
• Power management
• System controller (XCZU4EG)
The VPK120 evaluation board provides a rapid prototyping platform using the
XCVP1202-2MSEVSVA2785 device. See the Versal Architecture and Product Data Sheet: Overview
(DS950) for a feature set overview, description, and ordering information.

Board Specifications

Dimensions
Extended Height PCIe Form-Factor
Height: 7.478 inches (18.994 cm)
Length: 9.50 inches (24.13 cm) (¾ PCIe length)
Thickness: 64.24 mil ±08% (1.632 mm ±10%)
Note: Reserve two adjacent PCIe slots to accommodate fan-sink height.
Note: A 3D model of this board is not available.
See the VPK120 Evaluation Board
Environmental
Note: The operating temperature range is not fully tested across the specified temperature range. It is for
general guidelines only. Customers should use the VPK120 evaluation board for evaluation purposes only
in a normal lab environment and should not operate beyond room temperature.
• Temperature:
Operating: 0°C to +45°C
UG1568 (v1.0) August 9, 2022
VPK120 Board User Guide
website for the XDC listing and board schematics.
Chapter 1: Introduction
www.xilinx.com
Send Feedback
9