Kyocera PA2001w Operation Manual page 35

Installing the Software in Windows
If you are connecting this machine to a Windows PC, follow the next steps to install the software. The example shows you
how to connect your machine to a Windows 10.
Note In Windows operating systems, you must be logged in with administrator privileges to install the software.
You can use either Quick Installer or Custom Installer to install the software. Quick Installer automatically detects
connected machines and installs the required software. Use Custom Installer if you want to specify the printer port and
select the software to be installed.
1
Turn on the computer and start up Windows.
If the Welcome to the Found New Hardware Wizard screen displays, select Cancel.
2
Insert the Product Library disc supplied with the machine into the optical drive.
The installation program launches.
Note If the software install wizard does not launch automatically, open the Product Library disc window in Windows
Explorer and double-click Setup.exe.
3
Read the License Agreement. Click Agree.
The software install wizard starts up.
From this point, the procedure differs depending on your version of Windows and your connection method. Proceed to
the correct procedure for your connection type.
• Quick Installer
• Custom Installer
3-13
Preparation