Kyocera PA2001w Operation Manual page 55

9
Select the check boxes of functions you want to use with Wireless Network connection, and click Finish.
The network between this machine and the computer is configured.
1
Note Even if show "Setup Complete", if you have the problems communicating with the access point, please check
that access point information you set is correct. To reconfigure the settings, uninstall the drivers and utilities, and
reinstall them again.
Configuring Network Connection by Entering a PIN
You can configure the network by entering a PIN generated by this machine into the router page.
1
Connect the machine with a computer via USB cable when the machine is powered on.
2
Turn on the computer.
3
Open the KYOCERA Client Tool.
Click Start button on the Windows > Kyocera > KYOCERA Client Tool.
2
1
4
Click the Wireless Network settings tab > Wireless Network Setup Tool.
1
2
2
3-33
Preparation
3