5
Click Generate PIN > Next >.
1
6
Check the PIN, and then click Next >.
1
7
Enter the PIN checked in step 6 into the access point.
The network between this machine and the computer is configured.
For entering the PIN, refer to the Device Operation Guide.
8
Select the check boxes of functions you want to use with Wireless Network connection, and click Finish.
The network between this machine and the computer is configured.
1
Note Even if show "Setup Complete", if you have the problems communicating with the access point, please check
that access point information you set is correct. To reconfigure the settings, uninstall the drivers and utilities, and
reinstall them again.
2
2
2
3-34
Preparation