Kyocera PA2001w Operation Manual page 68

Communication Tab (PA2001w/PA2000w only)
No. Item
1 Host name
2 TCP/IP
3 SNMP
1
2
3
Description
Enter the host name of the machine.
MAX characters: 16
Select the check box to enable the DHCP protocol. Enter the IP address, Subnet
mask, and Default gateway values.
Select the check box to enable the SNMP protocol, and then select SNMP protocol
options. The SNMP protocol is used for providing and transferring management
information within the network environment. Read community and Write community
can have up to 16 characters. The default community is public. Type sysContact,
sysName, and sysLocation information up to 32 characters. Select Enable
authentication to activate machine authentication.
3-46
Preparation