Table of Contents
Advertisement
WARNING!
To reduce potential safety issues, use only the user-replaceable battery provided with the
computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
IMPORTANT:
information. To prevent loss of information, save your work or shut down the computer through Windows
before you remove the battery.
Remove the battery:
1.
Remove the four Phillips M2.0 × 4.0 screws (1) that secure the battery to the computer.
2.
Lift the bottom of the battery and remove it from the computer (2).
To install the battery, reverse the removal procedures.
Memory modules
To remove the memory modules, use this procedure and illustration.
Table 5-3
Memory module descriptions and part numbers
Description
16 GB
8 GB
4 GB
Before removing the memory, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
If you are replacing a memory module, remove the existing memory module:
Removing a battery that is the sole power source for the computer can cause loss of
Bottom cover and rubber feet on page
Battery on page
Preparation for disassembly on page
32).
Spare part number
L67710-005
L46598-005
L83673-005
30).
30).
Memory modules
33
Advertisement
Table of Contents
