Table 5-9
Touchpad description and part number
Description
Touchpad
Touchpad cable
Before removing the touchpad, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the touchpad:
1.
Remove the three Phillips M2.0.× 2.0 screws (1) that secure the touchpad bracket to the computer.
2.
Remove the bracket from the computer (2).
3.
Disconnect the cable from the ZIF connector on the touchpad module (1).
4.
Remove the three Phillips M2.0 × 2.0 screws (2) that secure the touchpad to the computer.
Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page
32).
Spare part number
M51626-001
M50423-001
30).
30).
Touchpad
41