Kohler Veil Comfort Height Homeowner's Manual page 10

Enable/Disable Automatic Features
NOTE: Automatic features come enabled from the factory.
Cover Open/Close
When enabled, the seat cover automatically opens when the toilet is approached. The seat cover will automatically
close 3 minutes after the toilet has been used.
Press and hold the "Lighting" icon on the control panel until the nightlight blinks three times.
Press and hold the "Cover" icon on the remote control each time to change between options. The nightlight blinks
once when the sensor is set to short distance, twice for middistance, and three times for long distance.
The nightlight blinks slowly when the feature is disabled.
Deodorizer
When enabled, the deodorizer automatically activates while the toilet is in use.
Press and hold the "Lighting" icon on the control panel until the nightlight blinks three times.
Press and hold the "Seat" icon on the remote control. The nightlight will blink.
The nightlight blinks once quickly when the feature is enabled, or blinks slowly when disabled.
Automatic Flush
When enabled, the toilet will automatically flush after the user stands up, lowers the cover, or approximately 60
seconds after the front of the toilet last senses motion.
Press and hold the "Lighting" icon on the control panel until the nightlight blinks three times.
Press and hold the "Flush-full" icon on the remote control. The nightlight will blink.
The nightlight blinks once quickly when the feature is enabled, or blinks slowly when disabled.
Automatic UV Cleaning
When enabled, an automatic UV cleaning cycle activates every 24 hours. Lifting the seat cover ends the process.
Press and hold the "Lighting" icon on the control panel until the nightlight blinks three times.
Press and hold the "Clean" icon on the remote control. The nightlight will blink.
The nightlight blinks once quickly when the feature is enabled, or blinks slowly when disabled.
Energy Save
When enabled, the toilet conserves energy by reducing the heated seat temperature when the toilet is not in use. When
disabled, the seat will remain at its set level even when not in use.
Press and hold the "Lighting" icon on the control panel until the nightlight blinks three times.
Press and hold the "Seat Temp" icon on the remote control. The nightlight will blink.
The nightlight blinks once quickly when the feature is enabled, or blinks slowly when disabled.
1385274-5-D
10 Kohler Co.