Table of Contents
Advertisement
Digital Remote Controlled Table with dynamic flat panel detector
User's Manual
1.2.16.
TOUCH SCREEN DISPLAY
30 LCD screen to display parameters (example below)
This screen shows the parameters according to the anatomical programming for table, generator and can
display images from video camera for centring without fluoroscopy.
It indicates the name of position in anatomical programming (if not, it indicates "manual positioning"), with
values of SID, column and tilting angles, height of tabletop regarding floor, height of detector centre
regarding table foot border, shutters opening, zoom if selected.
For the video camera, it displays the parameters of table and the image filmed by the camera in real time.
Refer to the following chapter "2. OPERATION"
For the generator, it displays the interface to modify exposure parameters as kV, mA, s, mAs, AEC
selection ... Refer to the following chapter "2. OPERATION"
It also displays error or warning message, or messages asking the user to input information.
For more details and explanations, refer to the following chapter "2. OPERATION"
18
Advertisement
Table of Contents
